Technical Specifications - Perel Tools EPSIC150G Manual Del Usuario

Step 3: Connect the device.
You can extend the connection cable to the device without problems.
Step 4: switch on the inverter.
The green LED lights up. The inverter delivers an output power of 230VAC.
Step 5: Switch on the connected device.
Respect the order of the aforementioned steps. To switch off the system, proceed in reverse order.
6. Measuring AC Voltages
The output wave of the AC inverter is a MODIFIED SINEWAVE. An AUTHENTIC RMS VOLT METER is required to
measure the AC output voltage. Using any other type of voltage measuring device will result in an AC voltage
reading that is up to 20 to 30V lower than the rated value. Only an authentic RMS voltmeter provides an accurate
reading.

7. Technical Specifications

DC Input Voltage
Output Voltage
USB output
Battery-Low alarm
Battery-Low Shutdown
Auto restart
Short-circuit Protection
No-Load Current
Overheating Protection
Protection
Dimensions (mm)
Weight
AC Output Voltage
Frequency
For more info concerning this product, please visit our website www.perel.be.
The information in this manual is subject to change without prior notice.
EPSIC150G
The power inverter being shut off through e.g. the short-circuit protection does not
need to be switched on manually; it will restart automatically.
Overload, high temperature, short-circuit, reverse polarity protection
DC 10V – 15V
150W
5V / 0.5A max.
10.5VDC +/- 0.5VDC
10VDC +/- 0.5VDC
Yes, with auto restart
0.2A
55°C +/- 5°C
70 x 70 x 170
500g
230VAC +/- 5%
50Hz +/- 1Hz
- 5 - PEREL