Timer Function; Cleaning And Care - MELINERA LED XXL Instrucciones De Utilización Y De Seguridad

Mounting the lampions
(see Fig. B)
Lay down the lanterns with the eyelets
ger openings) facing upwards.
Insert the cordless end of the lantern stretcher
into the lampion's upper and lower open-
9
ing. While doing so place the the lantern
stretcher's two arms
of the lower opening.
Hold on to the lantern stretcher. Pull the
eyelets upwards and hang them onto the
6
hangers .
7
Use
Insert the plug on end of the light chain
the socket of the mains adapter
Turn the connecting cap
clockwise to fix the connection.
Insert the mains adapter
socket.
Please note that the power adapter continues
to draw a small amount of power even if the
product is turned off as long as the power
adapter is plugged into a power outlet. To
switch the product off completely, unplug the
power adapter from the socket.

Timer function

The ON / OFF switch
Press once
The product glows permanently.
Press twice
The product lights glow permanently for 6 hours
and will be followed by a subsequent pause of
18 hours. Afterwards, the product will light up
again at its designated turn on time for 6 hours
followed by a subsequent pause of 18 hours.
Note: The ON / OFF switch
the timer function is activated.
(big-
6
centrally onto the rim
8
into
1
.
2
of the mains lead
4
into the mains
2
has three functions:
10
lights up when
10
Press three times
The product is switched off.
Note: The bulbs are connected in series. If one
bulb is defective, up to 10 bulbs may not light up.

Cleaning and care

CAUTION! DANGER OF ELECTRIC SHOCK!
First pull the mains adapter out of the mains socket.
CAUTION! DANGER OF ELECTRIC SHOCK!
For reasons of electrical safety the product must
never be cleaned with water or other liquids or
immersed in water.
D o not use any solvents, petrol or similar items.
This would damage the product.
O nly a dry, lint-free cloth should be used for
cleaning.
Disposal
The packaging is made entirely of recy-
clable materials, which you may dispose
of at local recycling facilities. The Green
Dot is not valid for Germany.
Observe the marking of the packaging
materials for waste separation, which
b
a
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
Contact your local refuse disposal au-
thority for more details of how to dispose
of your worn-out product.
GB/MT 19