Tuning in by Adjusting the
Frequency
1
Select the desired band (page 7).
2
Press and hold either side of the SEEK/
AMS/MANU button.
Release the button when the desired station
is received.
SEEK/AMS
MANU
For lower frequencies
PREVENT ACCIDENTS!
When tuning in during driving, use automatic
tuning.
Memorising Stations
EN
Automatically
— Automatic Memory Function
Stations with the clearest reception are
automatically searched and memorised on
each band (FMI, FMII, FMIII and AM). Up to 6
stations on each band can be stored on the
preset number buttons 1 to 6 in the order of
band frequency.
1
Select the desired band (page 7).
2
Press the
A.MEM
seconds.
The unit will be start scanning the selected
band and memorise the tuned stations on
the preset number buttons 1 through 6
automatically.
Memorising Only the
Desired Stations
1
Select the desired band (page 7).
2
Tune in the station which you wish to
store on a preset number button.
3
Press and hold the desired preset
number button (
two seconds until you hear a beep tone.
8
Actual total number:
— Manual Tuning
SEEK/AMS
MANU
For higher frequencies
button for more than two
INTRO
to
) for about
6
1
The number of the pressed preset number
button appears in the display window.
Up to 6 stations on each band (FMI, FMII, FMIII and
AM) can be stored on the preset number buttons in the
order of your choice. Therefore, 18 stations can be
memorised on FM.
If you try to store another station on the same preset
number button, the previously stored station will be erased.
Receiving the Memorised
Stations
1
Select the desired band (page 7).
2
Press momentarily the preset number
INTRO
button (
to
6
1
desired station is stored.
Note
If you press the preset number button for more than two
seconds, the currently received station will be memorised.
To receive the previously memorised station, make sure
that the preset number button is pressed only momentarily.
E
SONY CDX-3100 (
,S,C) 3-810-605-31(1)
) on which the