Introduction; Product Description; Safety; General Information - SOMFY Sonesse 40 PA Guia De Instalacion

1 Introduction

Product Description
The Sonesse 40 is a motor specially dedicated to interior applications.
®
The Sonesse 40 motor range can motorize all interior applications: Roller shades, Vene-
®
tian blinds, Roman shades, Pleated & cellular shades, Projection screens.
The Sonesse 40 is designed to ensure quiet operations.
®
Warning: The Sonesse® 40 isn't compatible with wind functions.

2 Safety

2.1 General information
• This Somfy product must be installed by a professional motorisation and home automation
installer, for whom these instructions are intended.
• Before installation, check that this product is compatible with the associated equipment
and accessories.
• These instructions describe how to install, commission and use this product.
• Moreover, the installer must comply with current standards and legislation in the country in
which the product is being installed, and inform his customers of the operating and mainte-
nance conditions for the product.
• Any use outside the sphere of application specified by Somfy is not approved. Such use,
or any failure to comply with the instructions given herein will invalidate the warranty, and
Somfy refuses to accept liability.
2.2 Specific safety advice
The safety instructions that must be observed, besides the usual rules, are
explained in these instructions and in the attached «Safety Instructions» document.
Never immerse the
motor in liquid!
Never drill holes in
the motor!
Copyright © 2011 Somfy SAS. All rights reserved - V0 - 06/2011
Avoid impacts!
Do not drop it!
3