Descargar Imprimir esta página

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

4. When the arms are at the desired height make sure to tighten the connection
using the lever on the frame.
5. Hang basket on the frame and place backrest bar into metal brackets until
push buttons lock into place.
6. Remove tray from Styrofoam and place on seat.
7. Install the full set of cane holder on the rollator as per the attached photo1
shown.
8. Check all of the wheels to see that they are in good working condition.
9. Check to make sure all other nuts, bolts and screws are tightly fastened.

3. USE

Breaks:
If you squeeze both breaks, the rollator will stop.
WARNING: before riding, always check the rear brakes for proper operation. Be
sure to practice riding and braking techniques before use. Check that all the
brake system components are functioning properly!
Folding the rollator:
To fold up the rollator when placing away for storage, simply remove the basket,
tray and the backrest, pull up the 2locking mechanisms , lift on the crossbar until
rollator closes, then pull up the small black locking mechanism on the right side
to secure the rollator in the close position.
Photo 1
8
Photo 2

Publicidad

Capítulos

loading

Productos relacionados para Ergofix 77600