Connecting The Camera; Use With Pc; Use With Wifi; Installation Of Camera Drivers And Software On Your Pc - Optika Italy OPTIKAM WiFi Manual De Instrucciones

8.

Connecting the Camera

The camera can be used as a normal PC camera or as a WiFi camera. Please refer to specific connection guide
(below) in order to ensure a proper operation of the device.

8.1 Use with PC

Plug the USB cable into the USB socket. Camera power will be ensured by the USB cable and therefore there
is non need to plug the provided power supply.

8.2 Use with WiFi

Plug the jack of the power supply into the socket of the camera. Using the camera as a WiFi unit doesn't require
the connection of the USB cable.
NOTE: the connection of the power supply automatically disables the USB connection. If the user wants
to use the camera under PC, he must not plug the power supply.
9.

Installation of camera drivers and software on your PC

1. Operating system requirements: all the Windows versions.
2. Insert the provided CD and run: \optika vision lite\ setup.exe
3. Now the Optika Vision Lite icon appears on your desktop.
4. You don't need to install any driver.
5. Plug the Camera in your PC: the camera will be automatically identified.

10. Starting the Software

Run Optika Vision Lite by clicking on its icon on your desktop:
Page 5