Risk Of Scalding When Carrying Out Service And Repair Work; Risk Of Burns When Carrying Out Service And Repair Work - Miele APWM900 Instrucciones De Montaje

M.-Nr. 11655860

Risk of scalding when carrying out service and repair work

WARNING

Risk of scalding when carrying out service and repair work.
The fluff filter box may contain hot water. When carrying out service and repair work, contact with hot water can
cause scalding.
A
Drain the water from the fluff filter box before commencing service and repair work.

Risk of burns when carrying out service and repair work

WARNING

Risk of burns when carrying out service and repair work.
Contact with hot surfaces causes burns.
A
Before commencing service and repair work, check that the surfaces have cooled.
Fluff filter box assembly
NOTE
Risk of tipping over
The fluff filter box can tip over on an uneven surface.
A
Set the fluff filter box down on an even surface for assembly.
A
Fit an M6 nut with 8.4 washer to the threaded bolts on each side of the fluff filter box, see Fig. 1.
A
Fit a holding plate to each side over the threaded bolts, see Fig. 2.
A
Adjust the height of the fluff filter box so that it is aligned with the washing machine drain.
A
Tighten the hexagon nuts to 10 Nm.
A
Attach the "Caution hot surface" sticker to the casing in a location that is clearly visible.
A
Connect the fluff filter box to the washing machine and the drain in accordance with the installation plan.
en
Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Umbau- und Montageanweisung
5 von 35
03.12.2020