Sapphire Scientific DRIEAZ HVE3000 Manual Del Usuario página 7

Remove float ball assembly.
Note: It is not necessary to remove the float ball assembly
to access the pump. However, we recommend removing
the assembly and cleaning it every time you inspect and
clean the pump.
To remove the float ball assembly, loosen lower the hose
clamp on the float ball assembly and remove assembly.
If you are servicing the float ball assembly, use a Philips
screwdriver to remove the float ball housing retaining
screw and remove the float ball housing. Rinse all
components clean and ensure float ball moves freely
inside housing. Reinstall float ball housing.
Loosen upper pump outlet hose clamp and pull the hose
off the outlet.
07-01782C F479/78-006 Dri-Eaz Products, Inc.
Warranty 07-01804 7 Sapphire Scientific