Installation Instructions; Installation - Workzone 46706 Manual Del Usuario

MOTION SENSING LED SPOTLIGHT

INSTALLATION INSTRUCTIONS:

Before beginning installation, please be sure to read through all instructions.
To install your Motion Sensing LED Spotlight, you will need the following items:
• 1 small Phillips screwdriver (Not included)
• 3 D-Cell Alkaline Batteries (Included)
NOTE: Light sensor only allows Motion Sensing LED Spotlight to activate in
darkness. We recommend you test in a dark room or closet.
1. Remove front cover of Motion Sensing LED
Spotlight by rotating counter-clockwise.
2. Pull face out from cup to reveal battery
holder as shown.
3. Push down on battery door tab to release.Insert
3 D-Cell batteries into Motion Sensing LED
Spotlight Please use only new alkaline or lithium
D-Cell batteries with l.5V rating. Do not mix old
and new batteries. Install batteries with polarity
in correct position as shown. Attach battery door
by matching the tabs to the rectangular holes
and then push down on front until door clicks
into place. Light will turn on and stay on as long
as there is motion.
4. Match arrows then turn clockwise. Make sure
unit is securely closed with arrow pointing past
the symbol to ensure weather proof seal is tight.
4
service@eurocentra.net

INSTALLATION

AFTER SALES SUPPORT
1 866 558 8096
PRODUCT CODE: 46706 03/2015