Units Of Measurement; Additional Information - Hawke VANTAGE Manual De Instrucciones

bows from a tree stand, HD mode gives a more realistic distance for use when calculating
holdover aim points.
If you hold the POWER button while in HD mode the range finder will continuously scan so you
can move around and get constant updates of the horizontal distance.
ANGLE MODE
HD
Angle mode measures the angle of projection. It is measured to the nearest tenth of a degree.
The straight line distance is shown on the upper distance readout and the angle measurement is
shown on the lower distance readout. When aiming downhill a minus symbol will appear to the
left of the angle display.

UNITS OF MEASUREMENT

The laser range finder can measure in meters or yards. To change between the two settings hold
the MODE button for 3 seconds. M = meters, Y = yards
7

ADDITIONAL INFORMATION

• The quality of the measurements strongly depends on the structure of the object, the weather
and visibility conditions. The more straight the laser beam strikes an object, the greater
distances can be measured.
• The LRF should only be repaired by a qualified professional. Do not attempt to disassemble or
repair the LRF as this will invalidate the warranty.
• Do not hold the POWER and MODE buttons together.
• Always insert battery "-" side first.
• When cleaning the lens, only use the cloth supplied or a soft, lint free cloth.
• Inspect the battery regularly for any signs of degradation and replace if necessary.
• Remove the battery if the LRF is not in use for long periods of time.
• Always store the LRF in a cool and dry environment.
• Keep the LRF in its carry case when not in use.
HAWKE WORLDWIDE WARRANTY
Subject to the limitations noted below, Hawke guarantees this product to be free of defects in
materials and workmanship for 2 years of the original owner. If your Hawke product is found to
have defects in materials or workmanship, we will repair or, if repair is not possible, replace the
product with an equivalent.
8