General Safety Instructions - iTools BRICO Manual De Instrucciones

EN
IMPORTANT
Always read the instructions before
you start use your power tool.
WHEN USING THIS
TOOL SHOULD ALWAYS
FOLLOW THE FOLLOWING
INSTRUCTIONS
Be very careful when children are
around.
Familiarize yourself with machine
controls before start working.
Be attentive whenyou are using the
machine.
Never use under the effect of
alcohol or medicines that could
change your behavior.
Always keep people distant from
your workplace.
Always take care to support well:
avoid the "balancing act".
Always follow the maintenance
instructions of this manual.
This tool should always be
connected to the network
with earth connection.
This power tool is properly
protected against risk of electric
shock, according standards of U.E.
in effect.
DOUBLE INSULATION
This tool is dually isolated - all metal
parts are isolated from power-
supply. It is important to
highlight that the double insulation
does not replace precautions
safety standards. The system
insulation works as an additional
protection against injury, resulting
from a possible failure on the tool's
electrical system.
10
USE OF EXTENSIONS
Always use with extensions with
adequate power to the power tool
you are using.
Make sure the extension is
connected to a source with earth
connection.
Make sure that the extension is in
good condition; Never touch an
extension or Power tool with hands
wet.
GENERAL SAFETY
INSTRUCTIONS
Do not expose power tools to rain.
Do not use in humid or wet
environments.
Do not use power tools in explosive
atmospheres; Never let children
play or touching on your power tool.
Keep people away while working
with the sander.
Wear protective goggles and mask
if the work becomes dusty.
Never force the power tool: learn to
known it well for take full advantage
of it safely.
Always use the correct power
tool for the desired task. Use
appropriate clothing: don't wear
loose clothing or jewelry to avoid an
accident.
Secure long hair.
If you work outdoors and in high
humidity situations, is advisable to
use protective rubber gloves and
anti-slip footwear.
Never carry your power tool by the
electric cable.
Always secure the workpiece in
order to have with both hands free.
SOME PRACTICAL ADVICE
When you have the need to replace
an accessory or need to use your
power tool, unplug the mains.
This will prevent the risk of
unintentionally connecting.
Before using your power tool make
sure it is in good conditions.
Thoroughly clean your power tool
after use, but do not use cleaners -
only a soft cloth.
Store your power tool in a sheltered
place, in order to increase its life
time.
Whenever you need any technical
assistance, deliver your power tool
to an specialist.
Store your power tool in a sheltered
place, in order to increase its life
time.
Whenever you need any technical
assistance, deliver your power tool
to an specialist.