Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 7: Unscrew 8pcs M5 Screws and Washers preassembled on top of tank
housing assembly.
Place the Side panel fixed parts to top of tank housing assembly. Make sure
match the top ends of tank housing assembly with the slot of Side panel fixed
parts. Match the threaded hole and fix each connection with 2pcs M5 Screws
and Washers.
STEP 8: Insert 4 projecting ends of each Grid-lower (25) into the seat slots of
Support Bar-Lower (24) as shown in picture. Fix all Grid-lower (25) except the
front side.
Guard Fastening Plate
STEP 9: Unscrew 4PCS Guard
Fastening Plates preassembled with the
sides of FLAME Screen(16).
21
Publicidad
Tabla de contenido
