Bluetooth Pairing - Hama SIRIUM4000ABT Instrucciones Breves

• After successful sign-in, you return to the Hama Smart
Audio app.
• Now select the language that you want Alexa to respond
to in future.
• Open the Amazon Alexa app and enter your access data
once again.
• Then specify your personal settings (time zone, device
name, etc.) in the Amazon Alexa app. Further information
can be found at www.amazon.co.uk -> Help and
Customer Service.
Note - Alexa Push to talk / function key
• Briefly press the [Action / Microphone mute] button
(3) on the soundbar to activate Alexa during audio
operation or high volume. Alternatively, press the
Action button (3) on the remote control.
• Press and hold the [Action / Microphone mute] button
(3) for about 3 seconds to switch off the microphone.
Alternatively, press the [MUTE] button (4) on the
remote control. The soundbar will now no longer
respond to the wake word until the microphone is
activated again. If the microphone is switched off, the
soundbar can still be operated using the buttons on
the soundbar or remote control.

7. Bluetooth pairing

You can pair your terminal device with the soundbar via
Bluetooth and use the soundbar as a playback device for
audio signals. You can control playback directly on your
terminal device or using the remote control. The volume
can also be controlled directly on the soundbar.
Note – Bluetooth
• Check whether your mobile device (smartphone,
tablet, etc.) is Bluetooth
• Note that the maximum range for Bluetooth
metres without obstacles such as walls, people, etc.
• The Bluetooth connection may be disrupted by other
®
Bluetooth devices/connections in the vicinity.
®
• It is only possible to connect the soundbar to one
terminal device.
• Note that compatibility depends on the supported
Bluetooth profiles as well as the Bluetooth
®
being used. (See Technical specifications, operating
instructions of the terminal device in use)
• Make sure that your Bluetooth-capable terminal device
is on and Bluetooth is activated.
• Activate the Bluetooth mode by repeatedly pressing the
[MODE] button (2) on the soundbar.
• Alternatively, press [Bluetooth] (13) on the remote
control.
• The Bluetooth status LED (7) begins to pulsate blue.
• Press and hold [MODE] (2) for about 5 seconds to
activate the pairing mode. The Bluetooth status LED (7)
begins to flash quickly.
• Open the Bluetooth settings on your terminal device and
wait until Hama SIRIUM4000ABT appears in the list of
Bluetooth devices found.
• If necessary, start searching for Bluetooth devices on
your terminal device.
• Select the Hama SIRIUM4000ABT soundbar in the
list of available devices and wait until the soundbar is
shown as connected in the Bluetooth settings on your
terminal device.
• The Bluetooth status LED (7) is now constantly lit blue.
• Start and control audio playback using the controls of
your terminal device or the remote control.
®
-capable.
®
is 10
®
versions
®
5