Package Contents; Unpacking; Installation - VWR Compact Star CS4 Manual De Instrucciones

Package Contents:

Description
VWR Centrifuge
Rotor Removal Tool
Power Cord
Operations Manual
Adapter Set for 5 and 7ml tubes

Unpacking:

When unpacking your VWR Centrifuge, be sure to remove the protective foam
from the rotor chamber prior to operation.
DO NOT RUN THE CENTRIFUGE UNTIL THE FOAM HAS BEEN
REMOVED.
The accessories supplied with the centrifuge should be kept with the instruction manual
near the centrifuge's place of installation.

Installation:

The centrifuge should be installed on a rigid, even surface such as a stable laboratory
bench, cabinet, etc. To guarantee sufficient ventilation, ensure that the centrifuge has at
least 15cm of free space on all sides, including the rear.
The centrifuge should not be located in areas subject to excessive heat such as in direct
sunlight or near radiators or the exhaust of a compressor, as a buildup of heat may
occur within the chamber.
Before operating the centrifuge, check that the power source corresponds to that on the
manufacturer's rating label, then connect the power cord to the centrifuge and the power
source.
Quantity
1
1
1
1
1