LG DLEX2801W Guía Del Usuario E Instrucciones De Instalacion página 38

BEFORE CALLING FOR SERvICE
Problem
Steam doesn't
generate but no error
code is shown.
Garments still
wrinkled after
STEAMFRESH
There are no creases
left on garment after
STEAMFRESH
Garments have
static after REDUCE
STATIC.
Garments are too
damp or too dry after
REDUCE STATIC.
Garments are not
uniformly damp after
EASY IRON.
Water drips from door
during Steam Cycle.
Steam is not visible
during Steam Cycle.
Drum does not turn
during Steam Cycle.
Cannot see steam
vapor at the
beginning of cycle.
The display shows
.
Odors remain in
clothing after
STEAMFRESH
™
FLOW SENSE
indicator light is on
during the drying
cycle
8
Possible Causes
• Water level error.
• Too many or too different
types of garments in dryer.
.
™
• The function of this cycle
is to remove wrinkles from
.
™
fabric.
• This is normal.
• Correct drying options not
selected.
• This is normal.
• This is normal.
• This is normal.
• This is normal.
• This is normal.
• MORE TIME button pressed.
• STEAMFRESh
remove odor completely.
.
• Ductwork is too long or has
too many turns/restrictions.
• Signifi cant blockage of the
ductwork due to lint buildup
or debris.
(cont.)
Solutions
• Unplug dryer and call for service.
• Small loads of 1 to 5 items work best.
• Load fewer garments. Load similar-type garments.
• Use an iron to make creases.
• Depends on individual moisture level in skin.
• Select load weight manually before starting
REDUCE STATIC option.
• Depends on the amount or type of garments.
• This is steam condensation on door surface.
• Steam vapor is diffi cult to see when the door is
closed.
• The drum is turned off so that the steam vapor
remains in the drum.
• Steam is released at different stages of the cycle
for each option.
• Pressing the MORE TIME button several times will
set the cycle for a large load such as a comforter.
• Fabrics containing strong odors should be
did not
™
washed in a normal cycle.
• Install a shorter or straighter duct run. See the
Installation Instructions.
• Ductwork should be checked/cleaned soon.
Dryer can be used in this condition, but drying times
may be longer.