AXXAIR SAXX-200 Manual De Instrucciones página 59

INNOVATIVE ORBITAL SOLUTIONS
If mode with wire :
Join experience
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363
Information on wire and wire position.
Start position:
- MANU: Welding
position
- AUTO: Before welding, machine will
rotate as specified here. This function is
usefull mainly with SATO machines in
order to wind cables before starting the
weld and to unwind the cables during
welding. By the way, if a SATO machine
is selected, a window helps you to
determine angle and direction in function
of the machine position.
Pregas torch: This is the time during which
we send gas into the hose pack before
creating the arc. This time allows the hose
pack to be cleared of all oxygen.
Preheating: In order to prevent any thermal
shock to the electrode, we apply a current
for a certain time to heat up the electrode
progressively.
Upslope: This is the time during which the
welding current passes progressively from
the pre-heating current to the high first
sector welding current.
The parameter « Delay wire start » is the
time between the beginning of the first level
and the beginning of the wire feeding.
330B Route de Portes Les Valence - ZI Les Bosses - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - Fax: +33 475 575 080 - commerce@axxair.com - www.axxair.com
- 59 -
English
starts on current