Introduction - TTI 1604 Manual De Instrucciones

This true RMS multimeter is a low-cost manual/autoranging bench-top instrument with a large,
bright LED display. It offers 4¾ digit (40,000 count) scale length and a resolution of 10µV and
10mΩ.
The key features are:
• 0.56" (14mm) high brightness LED display.
• 0.08% basic accuracy, 40,000 counts.
• Manual or autoranging.
• DC and AC Volts, DC and AC current, Resistance and Frequency measurement; Continuity
and Diode checks.
• True RMS AC measurement, 4,000 counts.
• Display nulling.
• Touch hold mode - holds onto a stable reading until updated.
• Remote control and data-logging to disk using optional Windows software.
• Fully compliant with EN61010-1 Safety and EN61326 EMC standards.
TEST EQUIPMENT RISK ASSESSMENT
Recommendation from the U.K. Health and Safety Executive
Users of this equipment and or their employers are reminded that Health and
Safety Legislation require them to carry out valid risk assessments of all electrical
work so as to identify potential sources of electrical danger and risk of electrical
injury such as from inadvertent short circuits. Where the assessments show that
the risk is significant then the use of fused test leads constructed in accordance
with the HSE guidance note GS38 'Electrical Test Equipment' for use by
electricians' should be used.
2

Introduction