Adjusting The Tv Settings - Haier LE32A650CF Manual De Instrucciones

Analogue
909
Video
910 Analogue
Audio
911 Analogue
912 Analogue
TV
913 Analogue
914 Analogue
Setup
915 Analogue
Lock
2.
Repeat above step until all the skipped
channels are set.
Channel Sort
To change the order of the channel list.
1.
Press / to highlight the channel that you
want to change position, then press OK.
will be displayed.
2.
Press / to highlight the desired channel
position, then press OK to swap the position
of the two channels.
3.
Repeat step 1 and 2 until all desired channels
are sorted.
Channel Edit
To edit the channel number and channel name.
1.
Press / to highlight the channel that you
want to edit, then press OK.
Video
Network Name:
Channel Number:
Audio
Channel Name:
TV
Frequency
Setup
Lock
2.
Press / to highlight Channel Number,
then press the number buttons on the
remote control to enter preferred channel
number.
3.
Press / to highlight Channel Name, then
enter each character of the new name by
pressing the number buttons repeatedly to
select a character.
Note Note
• To delete a character, press
Analogue Channel Fine Tune
To fine tune the analogue channel if the
reception is poor.
1.
Press / to highlight the analogue channel
that you want to fine tune.
Enter Select Exit
915
Sports
503.3
Enter Select Exit
button.
2.
Press / to adjust the frequency while
checking the background image, then press
OK to set.
Channel Number: 901
Channel Name: BBC
Frequency: 85.25 MHz
Clear Channel List
To clear all the channels that are stored in the
channel list.
Time Shift Mode
To turn time shift mode on or off. See "Time
Shifting" on page 23 for more information.
Device Info
To check the information of the device that is
connected to the USB jack on the back of the TV.

Adjusting the TV Settings

OSD Language
Video
Screen Mode
DPMS
Audio
Blue Mute
TV
Interaction Channel
MHEG PIN Protection
Setup
Time Setup
Lock
OSD Language
To select on-screen menu language.
Screen Mode
To select screen display mode.
Note Note
• You can also press the SCREEN button to select screen
mode.
DPMS (Display Power Management Signals)
Turn this setting on to set the TV to automatically
enter standby mode if no PC input signal is detected
after 40 seconds in VGA mode.
Blue Mute
Turn this setting on to display a blue screen when
there is no input signal or when playing audio
programmes.
Interaction Channel
Turn this setting on to enable interaction channel
function.
LED Backlit Flat TV Instruction Manual EN-15
Using Your TV
Set C C Cancel
English
16:9
On
Off
Off
Off
Enter Select Exit
EN