Beta 1837C/2100 Manual De Uso E Instrucciones página 5

OPERATION MANUAL AND INSTRUCTIONS
RECHARGEABLE LED SPOTLIGHT FOR BUILDING YARDS
OPERATING MANUAL AND INSTRUCTIONS FOR LED SPOTLIGHT FOR BUILDING YARDS
MANUFACTURED BY:
BETA UTENSILI S.P.A.
Via A. Volta 18,
20845, Sovico (MB)
ITALY
Original documentation drawn up in ITALIAN.
CAUTION
IIMPORTANT! READ THIS MANUAL THOROUGHLY BEFORE USING THE
LAMP. FAILURE TO COMPLY WITH THE SAFETY STANDARDS AND
OPERATING PROCEDURES MAY RESULT IN SERIOUS INJURY.
Store the safety instructions with care and hand them over to the users.
PURPOSE OF USE
The spotlight can be used for the following purpose:
• lighting workplaces.
The spotlight must not be used for the following operations:
• must not come into contact with chemical and corrosive substances
• must not be immersed or submerged
• must not be used for any applications other than recommended ones
WORK AREA SAFETY
Do not operate the lamp in environments containing potentially explosive atmospheres, because
sparks may be generated, which can ignite the dust or fumes.
Keep children and bystanders away from the LED lamp.
Do not use the lamp near flammable material.
While the spotlight is being charged, protect the power supply from humid and wet environments,
to prevent electric shocks.
LED SPOTLIGHT SAFETY
- Before use, check that the lamp has not been damaged, and that no parts are worn.
- Do not force the electric circuit of the lamp.
- Neither cover the heat dissipater nor prevent it from cooling down through fresh air circulation.
- Do not leave the spotlight completely upside down when it is on. Protect the spotlight from oil, heat
etc.
PERSONNEL SAFETY INSTRUCTIONS
- Stay alert; watch what you are doing.
- Do not direct the LED light beam at people or animals: this may cause temporary blinding.
- Do not use the spotlight when cracked; always check it for damage.
EN
5