Publicidad
Idiomas disponibles
Idiomas disponibles
Fig 2
Fit the wand to the floor tool (Fig 3)
Fig 3
To lengthen the telescopic wand slide the lock
and pull the tube out (Fig 4).
Fig 4
3
Controls
The on off switch is positioned at the rear of the
machine (Fig 5).
Fig 5
To turn the machine on press the button.
To switch off the machine press the button
again
4
Operation
4.1 Starting the machine
Ensure cable is fully extended before use.
Ensure a dust bag is fitted before use.
Press the on/off button to turn the vacuum
cleaner on.
Suction can be adjusted by sliding the airflow
adjuster located on the hose handle (Fig 6).
For maximum suction keep the adjuster closed.
After you finish cleaning, turn the vacuum
cleaner off by pressing the ON/OFF button.
Only then unplug from the power socket.
4.2 Using the floor tool
The floor tool can be used for cleaning
carpets and hard floors.
pedal should be down when cleaning hard
floors (Fig 7) and in the up position when
cleaning carpets (Fig 8).
5
Storage
Always unplug the machine after use.
After use check the bag. If full, replace the
bag.
Wind the supply cord ensuring that the plug is
not trailing on the floor.
Store the machine in a dry indoor area only.
6
Maintenance
WARNING
maintenance
adjustments switch off machine and
unplug from the electricity supply.
The machine requires minimum maintenance
apart from the following checks by the operator.
Supply cord - Regularly inspect sheath, plug
and cord anchorage for damage or loose
connection.
Body of the vacuum – Clean with a damp
cloth.
Vacuum filter – Check the vacuum filters,
clean and replace as appropriate.
6
Fig 6
The floor heads
Fig 7
Fig 8
-
Before
undertaking
operations
or
Publicidad
