What To Do If There Is A Problem; Technical Data; How To Replace The Fuse For Mod. 200/205 Dgt - Bravo 200 DGT Manual De Instrucciones

6.

WHAT TO DO IF THERE IS A PROBLEM

If the equipment does not go on after the switch ( 2 ) has been pressed, check that
the plug ( 3 ) is properly inserted in the socket. If it will not start, contact special-
ised or authorised personnel to repair the equipment and check the fuse ( 1 )
above the main switch ( 2 ). The fuse is 6.3A at 250V. The fuse type is Super
Rapid.
If there is any other kind of malfunction you must contact specialised or author-
ised personnel to carry out the repairs.
7.

TECHNICAL DATA

See the back of the equipment
8.
FUSE FOR MOD. 200/205/210 DGT
♦
Switch the hair dyer off at the main switch ( 2 ).
♦
Remove the hair dryer's electrical plug ( 3 ) from the wall socket.
♦
Unscrew the lid of the fuse box above the main switch ( 1 ).
♦
Take the old fuse out and replace with a similar new one: 6.3A 250V Su-
per Rapid type
♦
To restart the hair dryer model 200/205 DGT carry out the above opera-
tions in reverse order.
Ed. 21/04/2009
HOW TO REPLACE THE
- 19 -