Set The Clock Manually; Time Zone Setting - Explore Scientific RDC8001 Manual De Instrucciones

button to re-initiate RCC receiving.
5. RCC receiving will automatically start at 2:03, 3:03,
4:03, 5:03 every night. Auto receiving function will
cease if it is successful.
6. To stop RCC reception, press and hold the [ – /
] button.
7. If the device is still not receiving the signal, please
proceed to set the time manually.

SET THE CLOCK MANUALLY

1. Press and hold [ ] button to enter into time and
date setting.
2. The setting parameter will flash.
3. Press [ + /°C°F ] button once, the figure will increase
1 unit. Press and hold the [ + /°C°F ] button, the fig-
ures will increase rapidly.
4. Press [ – / ] button once, the figure will de-
crease 1 unit. Press and hold the [ – /
the figures will decrease rapidly.
5. Press [ ] button to confirm setting and enter to next
parameter.
6. Sequence of setting: Time zone  Year  Calendar
format (day-month/month-day)  Month  Day 
Language  12/24h format  Hour  Minute 
DST ON/OFF (For US only) Exit
7. If there is no action in 20 seconds, the setting will be
saved and you will exit the setting mode.

TIME ZONE SETTING

To set a different time zone, proceed as follows:
1. Press and hold [
2.The setting parameter will flash.
3. Press [ + /°C°F ] button to increase or [ – /
ton to decrease the Time zone offset.
°C/°F SETTING
Press [ + /°C°F ] button to switch Celsius (°C) / Fahr-
enheit (°F).
] button,
] button to enter time setting.
EN
IT
DE
FR
ES
] but-
9