Disposal; Warranty And Guarantee - NovoPress ACO403 BT Instrucciones De Uso

ACO403 BT
Regularly (before use, at the start of the working day) and when soiled (Fig. 13)
• Check the press collar, adaptor jaw and device for visible defects such as damage, material
EN
cracks and other signs of wear. If defects are found, do not use the device any more. Replace
it or send it to an authorised specialist workshop.
• Clean the press collar with compressed air.
• Lubricate the adaptor jaw pins.
• Spray the entire adaptor jaw with lubricant.
• Remove deposits from pressing contour (K).
• Clean press collar pressing contour (K).
• Completely coat pressing contour (K) with lubricant.
• Check that sliding segments (C) and shells (D) can move freely.
Recommended lubricant:
• enclosed oil
• oil containing MoS2
After every 50 pressing operations:
• Spray joints (G) of the press collars with lubricant.
• Spray lubricant between sliding segments (C) and shells (D).
•
Six-monthly inspection
Have the device inspected by a qualified electrician or a Novopress workshop
•
Annually to get a 1-year extended warranty (see section 13 Warranty and guarantee)
Have the press device inspected and serviced at Novopress or a Novopress workshop.
•

12 Disposal

•
The instructions in the operating instructions provided with the battery charger must be complied with
when disposing of rechargeable batteries and the charger.
•
The product must not be disposed of as normal household waste.
Novopress recommends that disposal be carried out by authorised specialist companies.
Alternatively, waste devices can be returned directly to Novopress (or a specialist workshop) for
proper disposal.
•

13 Warranty and guarantee

Novopress provides the full statutory warranty of 24 months for its press devices and tools. The
warranty period always commences on the date of delivery, which must be proven by means of the
sales documentation in case of doubt.
•
Within the warranty period, the warranty covers the repair of any damage or malfunction of these tools
that is attributable to material or production faults.
The following are not covered by the warranty:
For wearing parts, the Novopress warranty lasts only for the intended service life.
Service work and parts provided in response to warranty claims do not have to be paid for. However,
all shipping costs shall be borne by the user.
CAUTION!
Groundwater hazard
The device contains hydraulic fluid.
Hydraulic fluids pose a hazard to groundwater. Uncontrolled drainage or improper
disposal is punishable by law.
Therefore:
– Dispose of the device in an environmentally responsible manner.
• Damage caused by improper use or inadequate servicing.
• Damage caused by the use of products not approved by Novopress for use with its
press devices.
• Damage caused by pressing unsuitable pipes or fittings.
26