Troubleshooting - Levoit Mini True HEPA LV-H13EU Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

EN
T R O U B L E S H O OT I N G
Problem
Air purifier will not turn
on or respond to button
controls.
Airflow is significantly
reduced.
Air purifier makes an
unusual noise while the
fan is on.
Poor air purification
quality.
12
Possible Solution
Plug in the air purifier.
Plug the air purifier into a different outlet.
Disconnect the AC power adapter from the air purifier and
reconnect it.
Check to see if the AC power adapter is damaged. If so, stop using
the air purifier and contact
The air purifier may be malfunctioning. Contact
(see page 14).
Make sure the filters are removed from their packaging and
properly in place (see
Getting
Press the Control Button to increase fan speed.
Leave at least 38 cm / 15 inches of clearance on all sides of the air
purifier.
The Pre-Filters may be clogged by large particles, such as hair
or lint, blocking airflow. Clean the Pre-Filters (see
Filters, page 9).
Replace the filters (see
Make sure the filters are properly in place with plastic packaging
removed (see
Getting
Started, page 6).
Make sure the air purifier is operating on a hard, flat, level surface.
Replace the filters (see
The air purifier may be damaged, or a foreign object may be inside.
Stop using the air purifier and contact
page 14). Do not try to repair the air purifier.
Press the Control Button to increase fan speed.
Make sure no objects are blocking the sides or top of the air
purifier (the outlet or inlets).
Make sure the filters are removed from its packaging and properly
in place (see
Getting
Started, page 6).
Close doors and windows while using the air purifier.
Make sure the room is smaller than 15 m² / 161 ft². The air purifier
may not be as effective in larger rooms.
Replace the filters (see
Customer Support
Started, page 6).
Replacing the
Filters, page 11).
Replacing the
Filters, page 11).
Customer Support
Replacing the
Filters, page 11).
(see page 14).
Customer Support
Cleaning the
(see

Hide quick links:

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido