Publicidad
Idiomas disponibles
Idiomas disponibles
ARTERO B3 ELECTRIC BATHTUB
REF: B435
I. LIST OF COMPONENTS
1. Bathtub box
2. Bathtub back panel
3. Strap bar
4. Bathtub side panels
6. Electric Lifting Base
7. Door
8. Micro-perforated tray
9. M8 Hex Nut
10. M8 head screw
11. Tap
12. Tap adapter
14. Shower hose
13. Shower
15. Basket
16. Hose tap adapter
17. Screw
18. Rubber washer
19. Rubber washer
20. Plastic lock washer
21. Screw
Tools Needed:
Phillips Screwdriver and Wrench
II. ASSEMBLY INSTRUCTIONS
1. As shown in figure 1, present the back and side
panels on the bath box and screw.
2. Present and screw the bathtub to the lift base.
3. Put the screws, washers and nuts in the indicated
order in figure 1, and screw in.
4. Place the strap bar on the side panels and screw.
5. Screw the Basket on the side panel.
6. Screw the legs onto the bathtub lift base by
adjusting the height so that the bathtub is stable.
7. Pass the tap through the two large holes on the
right panel and screw in the adapter.
8. Connect the two water hoses to the tap and
tighten it to prevent water leakage.
9. Connect the shower hose and the shower to the
tap outlet.
10. Fit the microperforated tray in the bath box.
Publicidad
