Publicidad
WARNING
For the unit to work correctly and to last longer, it is
recommended that the installation is carried out by a
professional.
IMPORTANT
Disconnect from the mains before handling and only replace
the bulb when it has cooled down.
2 plugs, 2 galvaniced flat-headed screws 3.5 x25 DIN 7982
ASSEMBLY INSTRUCTIONS
Screw the light rose mounting onto the ceiling in the desired
position and introduce the leads through the hole in the
centre.
Adjust height of the unit by slightly unscrewing the rose bolt
and pulling it until the desired position is obtained.
Connect the junction box , and place it onto the canopy.
Place the canopy onto the mounting support and screw
down the sidescrews.
CLEANING AND CHANGE THE BULB
To slide up glass and metal shade. Adjust height of the buble
by slightly unscrewing the block bolts and pulling it until
190mm from buble to last block .
FIXINGS INCLUDED
Publicidad
