Starting Up; Operation - COOL HEAD RC200 Manual De Instrucciones

S a t t r n i g U p
GB Plug in the cabinet.
The display shows the actual cabinet temperature
Servicing
Make sure the appliance is switched off at the mains before service is performed on electrical parts.

Operation

Storing food
To get the best results from your appliance, follow these instructions:
• ffs in the appliance when it has reached the correct operating temperature.
• Always close the door, when not in use and appliance is switched on.
•
• Wrap or cover food where possible.
•
• Avoid opening the door for prolonged periods of time.
• The maximum load for a shelf is 25 kg.
• The food must be put into container before placed into cabinet or on the shelf. Food must not be placed into food cabinet directly.
Turn on
•
•
•
• The on the display will flash for 3-min to indicate a delay between the motor compressor being stopped and then restarted.
Temperature setting and control
Thermostat display and control panel
1. Defrosting light
3. Digital thermostat
5. Temperature modifi cation keys
6. Manual defrost
How to see the set point
•
•
How to change the set point
• T key for more than 2 seconds to change the set point value;
•
• T
• To memorise the new set point value push the SET key again or wait 10s.
Main switch
Lock
The current temperature within the appliance is displayed.
1
6
SET
4
T key, the set point will be showed;
T key again or wait about 5s to return to normal visualisation.
Thermostat Display
2
5
3
linking;
within 10s.
6