Fagor LF-020 SX Manual De Instalacion Y Uso página 59

d Close the lid tight and
clean the salt around
the container.
When the salt container needs
filling, you should always do it
before a wash and not afterwards.
When does the salt need replacing?
When salt is needed, the salt indicator will light up steadily on the
display . When the salt has been added, the indicator light will
switch off.
RINSE-AID
The rinse-aid helps drying and prevents drops of water from clinging to utensils after washing.
The rinse-aid container is located on the inside of the door, next to the detergent container.
It has a 4-position
dispenser for adjusting the
amount of rinse-aid to the
water quality (the
dispenser is set at
position 2 at the factory).
If you notice drops of
water on utensils,
increase the position of
the rinse-aid dispenser. If
the utensils have white or
sticky lines, lower the
position.
a Once the level of the
dispenser has been
set, fill the container
to the top, but do not
overfill it. If this
occurs, clean the
spillage with a cloth.
d
IMPORTANT
You should not use salt if your dishwasher does not
need it. In this case, the pilot light will remain on at
all times.
RINSE-AID CONTAINER
a
I M P O R T A N T
A greater amount of rinse-aid does not necessarily mean
better results. In fact, too much rinse-aid can lead to
water marks.
English
Mensaje en pantalla
auto 55-65 O
DISPENSER
59
c