4-IN-1 RGBW LED PAR CAN WITH SMD LED STROBE
EXPLANATION OF SYMBOLS ON THE SILKSCREEN
The triangle containing a lightning symbol is used to indicate whenever your health is at risk (due to electro-
cution, for example).
An exclamation mark in a triangle indicates particular risks in handling or operating the appliance.
The unit complies with CE standards
For indoor use only
Protection class II. Requires no earth connection
Minimum distance between the appliance and other objects
0.5m
Don't stare into the light beam
IMPORTANT SAFETY INSTRUCTIONS AND DANGER WARNINGS
•
Please read these instructions carefully, they include important information about the installation, usage and
maintenance of this product.
•
Please keep this User Guide for future reference. If you sell the unit to another user, be sure that he also
receives this instruction booklet.
•
Always make sure that you are connecting to the proper voltage, and that the line voltage you are connecting
to is not higher than that stated on the decal or rear panel of the fi xture.
•
This product is intended for indoor use only!
•
To prevent risk of fi re or shock, do not expose fi xture to rain or moisture. Make sure there are no fl ammable
materials close to the unit while operating.
•
The unit must be installed in a location with adequate ventilation, at least 20in (50cm) from adjacent surfaces.
Be sure that no ventilation slots are blocked.
•
Always disconnect from power source before servicing.
•
Secure fi xture to fastening device using a safety chain. Never carry the fi xture solely by its head. Use its carry-
ing handles.
•
Maximum ambient temperature (Ta) is 104° F (40°C). Do not operate the fi xture at temperatures higher than
this.
•
In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit by
yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the near-
est authorized technical assistance center. Always use the same type of spare parts.
•
Don't connect the device to a dimmer pack.
•
Make sure the power cord is never crimped or damaged.
•
Never disconnect the power cord by pulling or tugging on the cord.
•
Avoid direct eye exposure to the light source while it is on.
•
The lamps are not replaceable. If they are damaged, the whole unit must be discarded
•
The product is for decorative purposes only and not suitable as a household room illumination.
•
DISCONNECT DEVICE: Where the MAINS plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.
INSTALLATION
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is fi rmly fi xed to
avoid vibration and slipping while operating. Always ensure that the structure to which you are attaching the unit
is secure and is able to support a weight of 10 times of the unit's weight.
2
Manual - PAR-MINI-STR
INSTRUCTION MANUAL
CAUTION
DO NOT OPEN THE HOUSING
SHOCK HAZARD
©Copyright LOTRONIC 2021