Blaupunkt BV4000 Manual Del Usuario página 10

MAJOR PARTS & ASSEMBLY
1. Shoulder strap
2. Trigger
3. Motor housing
4. Upper hook for collection
bag
5. Quick change lever
6. Power cord
ASSEMBLY
The blower vac is supplied with some components not assembled. To assemble, proceed as follows:
Assembly of the tube (Fig. 2-5)
• Insert the lower tube (11) into the upper tube (13) and align the screw hole (12) so that the screw can fit through. Fix the tubes
together by tightening the screw.
• Slide the wheel bracket (17) over the lower tube as shown in figure 4. Align the screw hole and securely fasten the screw (18)
to attach the wheel bracket to the lower tube.
Attaching the tube to the motor housing (Fig. 6)
• Slide the tube which you assembled in step 1 over the the motor housing.
• Insert and tighten screw (19) to fix blower tube on the product.
Attaching the collection bag (Fig. 7-9)
• Outlet connector (20) hook on the motor housing (fig.7)
• Attach the plastic connector on the bag to outlet until it clicks into position (fig.8)
• Attach the strap on the lower end of the collection bag to the hook on the tube (8)
7. Cable retainer
8. Lower hook for collection
bag
9. Collection bag
10. Wheels
11. Lower tube
12. Tube connection screw hole
13. Upper tube
14. Front handle
15. Shoulder strap mounting
hook
16. Rib
17. Wheel bracket
18. Screw
19. Screw
20. Outlet connector
21. Collection bag connector
22. Blow mode selected
23. Vacuum mode selected