Using The Coffee Maker; Installing The Water Filter - KitchenAid KCM1204 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

USING THE COFFEE MAKER

INSTALLING THE WATER FILTER

Before first use
Wash the Gold Tone permanent filter, brew
basket, and carafe in hot, soapy water; then
rinse with clean water and dry. Do not use
abrasive cleansers or scouring pads.
NOTE: These parts can also be washed
in the top rack of the dishwasher.
Installing the charcoal filter:
Using the filter is optional but strongly
recommended. The Coffee Maker will
operate normally without the filter, but it
reduces contaminants that can impair
coffee flavor.
The filter is for use only with municipally
treated tap water or well water that is
regularly tested for contaminants; it is not
intended to remove contaminants in water
that is not suitable for drinking.
IMPORTANT: Every time you install a new
water filter, run the Coffee Maker through
a complete brew cycle without coffee.
Use a full carafe of clean, cool water.
Put the charcoal filter into the filter
2
assembly. Snap to close.
6 | USING THE COFFEE MAKER
Place the charcoal filter in a
container filled with fresh, cool
water. The charcoal filter should
1
remain submerged in the water
for 10 minutes. Rinse the charcoal
filter under running water for
5 seconds after soaking.
Lift the water tank lid using
3
the tab at the front of the lid.

Publicidad

Tabla de contenido
loading

Tabla de contenido