Publicidad
Idiomas disponibles
Idiomas disponibles
Basic Operation
T
urning a source on or off
You can select the source you want to listen to.
To switch to built-in CD player, load a CD in this
product. (See page 17.) To switch to a "Memory
Stick" player, load a "Memory Stick" in this
product. (See page 37.)
1. Press SOURCE to select the desired
source (e.g., tuner).
Press SOURCE repeatedly to switch
between the following sources:
Built-in CD player (MP3) = TV tuner
= Tuner = DAB tuner = Music server
= "Memory Stick" player = Multi-CD player
= External unit 1 = External unit 2
= AUX
2. Press VOLUME to extend the VOLUME
outward.
• When you press VOLUME, it extends out-
ward so that it becomes easier to turn. To
retract VOLUME, press it again.
3. Turn VOLUME to adjust the volume.
4. Press and hold SOURCE to turn the
source off.
Note:
• External unit refers to a Pioneer product (such as
one available in the future) that, although incompat-
ible as a source, enables control of basic functions
by this product. Two external units can be con-
trolled by this product, although "External" is dis-
played whether you select external unit 1 or external
unit 2. When two external units are connected, the
allocation of them to external unit 1 or external unit
2 is automatically set by this product.
• In the following cases, the sound source will not
change:
* When no product corresponding to the source is
connected to this product.
* No disc is set in this product.
* No "Memory Stick" is set in this product.
* No magazine is set in the multi-CD player.
* AUX (auxiliary setting) is set to off. (Refer to page
58.)
• When this product's blue/white lead is connected to
the car's auto-antenna relay control terminal, the
car's auto-antenna extends when this product's
source is switched on. To retract the antenna,
switch the source off.
S
OFT KEY operation
SOFT KEY operation means that the function of
a button changes as indicated on the display.
The multi-function buttons provide SOFT KEY
operation; the functions performed by the but-
tons change according to the function or setting
that has been selected.
Function names
Multi-function buttons
The explanations given in this manual are
based on FORM 1 display. If you have selected
FORM 2, the functions of some of the multi-
function buttons may be different from those
indicated in the manual.
Important
In this manual, for operations using the multi-
function buttons the function displayed is used
as the name of the function button.
"3"
12
Publicidad
