Product Setup - D-Link DIR-850L Guia De Instalacion

PRODUCT SETUP

WeB-BAseD setuP
In order to use all of the functions of this router, you must register it with mydlink
follow the steps at the end of the setup wizard during installation to register your product with your
™
mydlink account.
NOTE: After mydlink
connection will be set to Always On. If your ISP charges for usage, you may wish to manually
choose Dial On Demand as your default setting.
Router
Router
PC
Router
Admin Password:
log In
4
™
registration is completed, your router's default PPPoE, L2TP, PPTP
Step 1
Position your DIR-850L router close to your internet connected
modem and Computer. Keep the router in an open area for better
wireless coverage.
PC
Modem
Step 2
Modem
Plug the Ethernet cable from your modem to your router. Plug it into
the port labeled INTERNET on the router.
Connect the supplied power adapter into the power port on the back
of the router and then plug into a power outlet or surge protector.
Verify the power LED is lit.
Step 3
Modem
Plug one end of the included Ethernet cable into the LAN port on the
back of the router. Plug the other end of this cable into the Ethernet
port on your computer.
Alternatively, you can connect to the router through Wi-Fi. Go to your
computer or mobile device's Wi-Fi settings. Select the network that
is printed on the included Wi-Fi Configuration Note (e.g.: dlink-a8fa),
then enter the Wi-Fi password also printed on the Wi-Fi Configuration
Note (e.g.: akbdj19368).
Step 4
From the computer you connected to the router, open a web browser.
If you are not automatically directed to the D-Link Setup Wizard page,
enter http://dlinkrouter.local./ into the address bar. Follow the
onscreen instructions to configure your D-Link router. If you wish to
configure your router manually, use Admin as your username and
leave the password blank.
The full product manual is available from the D-Link website.
™
. Simply
Dir-850l