Waeco ST-8810 Instrucciones De Uso página 14

_ST-8810.book Seite 14 Donnerstag, 2. Februar 2006 11:24 11
Measurement Operation
3.2 Selecting temperature unit (°C/°F)
Select the temperature unit (degrees °C or degrees °F) by first pressing the
"On/Hold" key and then pressing the "°C" or "°F" key. The actual unit will be
indicated on the LCD.
Press the "°C" key to set the unit to "degrees °C". (Fig. 5).
Press the "°F" key to set the unit to "degrees °F" (Fig. 6).
Fig. 5
3.3 Data hold
The meter automatically maintains the last temperature reading on the LCD
for 7 s after releasing the "On/Hold" key. No additional keys are required to
freeze the displayed reading (Fig. 7).
Fig. 7
3.4 Backlight LCD
Turn on the backlight by first pressing the "On/Hold" key and then pressing
the "Backlight" key.
Repeat the procedure to turn the backlight off (Fig. 8).
Fig. 8
14
Fig. 6
ST-8810