Delivery Scope; Intended Use; Technical Data; Noise/Vibration Information - Bosch GBH 180-LI Professional Manual Original

OBJ_BUCH-3029-001.book Page 6 Tuesday, November 1, 2016 4:16 PM
6 | English
Symbol Meaning
K Uncertainty
T Permitted ambient temperature during
1
charging
T Permitted ambient temperature during
2
*
operation
* limited performance at temperatures
<0 °C
Recommended batteries
Recommended chargers

Delivery Scope

Rotary hammer, auxiliary handle and depth stop.
Application tools and other accessories shown or described
are not part of the standard delivery scope.
A complete overview of accessories can be found in our ac-
cessories program.

Intended Use

The machine is intended for hammer drilling in concrete,
bricks and masonry, as well as for light chiselling work. It is al-
so suitable for drilling without impact in wood, metal, ceram-
ics and plastic, as well as for screwdriving.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
Mounting and Operation
The following table indicates the action objectives for mounting and operation of the power tool. The instructions for each action
objective are shown aside. Depending on the type of application, various instruction combinations are required. Observe the
safety instructions.
Action
Changing the position of the auxilia-
ry handle
Removing the battery
1 609 92A 34W | (1.11.16)

Technical Data

The technical data of the machine are listed in the table on
page 76.

Noise/Vibration Information

and storage
The measured values of the machine are listed in the table on
page 76.
Sound emission values determined according to
EN 60745-2-6.
Vibration total values a
determined according to EN 60745-2-6.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
(triax vector sum) and uncertainty K
h
Figure Please observe
1
2
Page
77
77
Bosch Power Tools