Operation Mode; Memory Function; Measurement With The Desired Systolic Pressure - A&D UA-767NFC Manual De Instrucciones

1. Normal Measurement
Press the
START

2. Memory Function

When the memory setting is 100:
This device will store the last 100 measurements in memory.
When the measurement exceeds 100, the oldest data will be deleted
automatically and the most recent data will be stored.
When the memory setting is 0:
This device will not store any data in memory.
3. Deleting all Data Stored in Memory
Make sure that the device displays the clock.
Press and hold the
The mark appears. After a while it starts blinking, then
disappears.
Now all data stored in memory has been deleted.
Note: This operation will delete all data stored in memory.
You cannot select which data to delete.

4. Measurement with the Desired Systolic Pressure

Refer to page 13 for measurement with the desired systolic pressure.

Operation Mode

button. Blood pressure is measured.
button.
English 6