Technical Data - Surtek CN706A Manual De Usuario

fastened to the machined curved seats of the
base casting.
We suggest the customer purchase an ad-
ditional cutterhead assembly complete with
bearings and housings. The extra cutterhead
assembly is necessary. To keep the machine in
operation when the original cutterhead is sent
back to the factory for repairs, such as, replace-
ment of bearings, grinding and resetting the
knives. The additional cost of an extra cutter-
head assembly is justified when maximum pro-
duction of high quality type work is required.
When mounting the cutterhead to the base
casting of the jointer, be sure the machined
curved seats of the base casting are cleaned
free from any dust, dirt, or grease to obtain a
good tight fit.
E N G L I S H •

TECHNICAL DATA

CN706A
VOLTAGE - FREQUENCY
TABLE
CUTTING CAPACITY
RABETTING
NO LOAD SPEED
CUTS PER MINUTE
ASSIGNATED POWER
WEIGHT
CN708
VOLTAGE - FREQUENCY
TABLE
CUTTING CAPACITY
RABETTING
NO LOAD SPEED
CUTS PER MINUTE
ASSIGNATED POWER
WEIGHT
U se r ' s m an ua l
120 V ~ 60 Hz
1 215 mm x 184 mm
6" x 1/8" (152 mm x 3,1 mm)
1/2" (12,7 mm)
5 200 r/min
15 600
750 W (1 HP)
102 kg (225 lb)
120 V ~ / 220 V ~ 60 Hz
1 215 mm x 184 mm
8" x 1/8" (200 mm x 3,1 mm)
3/8" (10 mm)
5 200 r/min
15 600
1 500 W (2 HP)
132 kg (291 lb)
21