T-Fal OptiGrill Guia Del Usuario página 10

19
21
10
19 -20 When the color corresponding to
21 Close the appliance. The control panel
20
Cooking more food
How to cook another batch of food:
After finishing your first batch of food:
1. Make sure the appliance is closed with
2. Select
3. Press the "OK" button: the appliance
4. The pre-heating is complete when an
5. After the pre-heating, the appliance is
Important:
- Please note that any new batch of food,
the pre-heating phase is mandatory. Re-
member to always have the grill closed
and no food inside in order for the pre-
heating to effectively function.
- Then wait for the pre-heating to be com-
plete before opening the grill and place
the food inside.
your choice of cooking level appears,
open the appliance and remove your
food.
will light up and set itself to 'choice of
program' mode.
Comment: the security system will turn
off automatically if no program selec-
tion is made.
If you want to cook a second batch of
food, please pre-heat the appliance
again (see section 2. Pre-heating, start-
ing from point 9) even if you want to
cook the same type of food.
no food inside.
the appropriate
mode/program (this step is necessary
even if you decide to pick the same
cooking mode than for the previous
batch of food).
starts pre-heating. The pre-heating is
symbolized by the cooking level indica-
tor that flashes purple.
audible beep is heard and the cooking
level indicator stops flashing purple.
ready for use. Open the grill and place
the food inside the appliance.
N.B.: if the new pre-heating cycle is car-
ried out immediately after the end of the
preceding cycle, the pre-heating time will
be reduced.
cooking