Important Safety Instructions - Makita BTW152 Manual De Instrucciones

ENGLISH
1 Red part
2 Button
3 Battery cartridge
4 Switch trigger
5 Lamp
6 Reversing switch lever
7 Socket
8 Anvil
9 Pin
SPECIFICATIONS
Model
Capacities
Square drive
No load speed (min
Impacts per minute
Max. fastening torque
Overall length
Net weight
Rated voltage
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
Intended use
The tool is intended for fastening bolts and nuts.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
CORDLESS IMPACT WRENCH SAFETY
WARNINGS
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring. Fasteners con-
tacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator
an electric shock.
2. Wear ear protectors.
3. Check the socket carefully for wear, cracks or
damage before installation.
4. Hold the tool firmly.
5. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
4
Explanation of general view
10 O-ring
11 Hook
12 Screw
13 Groove
14 Standard bolt
15 Fastening torque
16 Proper fastening torque
17 Fastening time
18 High tensile bolt
Standard bolt
High tensile bolt
–1
)
GEA010-1
GEB049-2
19 Limit mark
20 Rear cover
21 Screws
22 Spring
23 Arm
24 Recessed part
25 Carbon brush cap
26 Hole
BTW152
M12 – M16
M8 – M12
12.7 mm
0 – 2,400
0 – 3,200
200 N•m
158 mm
1.5 kg
D.C. 14.4 V
6. The proper fastening torque may differ depend-
ing upon the kind or size of the bolt. Check the
torque with a torque wrench.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this instruc-
tion manual may cause serious personal injury.

IMPORTANT SAFETY INSTRUCTIONS

FOR BATTERY CARTRIDGE
1. Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using bat-
tery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
5. Do not short the battery cartridge:
(1) Do not touch the terminals with any conduc-
tive material.
(2) Avoid storing battery cartridge in a container
with other metal objects such as nails, coins,
etc.
ENC007-4