Installation In The Vehicle; Care Instructions - KIKKA BOO AMARO Instrucciones De Uso

III. INSTALLATION IN THE VEHICLE
3.1. Group II Ill (15-36kg), Adult safety belt only
Your child will be secured using the vehicle's seat belt. It will therefore be necessary to remove the harness fitted to the child seat before use (3-P).Please
see Adjusting the shoulder height (3-P/3-Q,). Remove the crotch strap by twisting and feeding the metal retaining keeper through the bottom of the
child seat (3-Q). and up through the seat's upholstery(3-R). To fit the child's car seat, place it on a passenger seat with a 3 point seat belt. Make sure it is
facing towards the front of the vehicle (3-S).
Pull the lap and diagonal sections of the car seat belt across and secure it in the normal way. Make sure that there are no kinks or twists in the car seat
belt. The lap belt should be routed under both the arm rests of the child seat and the diagonal belt routed over the armrest as shown. By passing the
diagonal belt guides under the headrest. (3-T).
3.2. Group II,III (15-36kg), Adult safety belt+ ISOFIX
Place the child's car seat on a passenger seat with a 3-point seat belt and ISOFIX anchorages. Make sure the child seat is facing towards the front of the
car.
Extend FIX connectors to the ISOFIX anchorages on vehicle seat, push to make it connect. Continue push the child car seat, make it close to the vehicle
seat back. Check the FIX release button, make sure the indicator turns to Green.(3-U to 3-X)
Pull the lap and diagonal sections of the car seat belt across and secure it in the normal way. Make sure that there are no kinks or twists in the car seat
belt. The lap belt should be routed under both the arm rests of the child seat and the diagonal belt routed over the armrest as shown. By passing the
diagonal belt guides under the headrest. (3-Y).
3.3. Group Ill (22-36kg), Adult safety belt+ ISOFIX
The back section of the seat can be removed by pushing the back of the seat away from the base of the seat ( 3-Z / 3-1).
Place the child's car seat on a passenger seat with a 3-point seat belt and ISOFIX anchorages. Make sure the child seat is facing towards the front of the
car. Extend FIX cannectors to the ISOFIX anchorages on vehicle seat,push to make it cannect.Continue push the child car seat, make it close to the vehicle
seat back. Check the FIX release
button, make sure the indicator turns to Green.(3-2). Pull the lap and shoulder sections of the vehicle seat belt across and secure it in the normal way.
The lap belt should be routed under both the arm rest of the child seat, and the diagonal belt routed over the armrest as shown (3-3).
IV. CARE INSTRUCTIONS
4. 1. Remove and refit seat cover
Then the seat cover can be removed from the seat.
To refit the seat cover, just reverse the above steps.
4.2 Cleaning
The harness and plastic parts can be sponged with a mild detergent and warm water.
Ensure no soap gets into the buckle or adjusters.
Do not use chemical cleaners or bleach on the harness straps.
Dry thoroughly before use.
ENGLISH