Dometic MaCave A192G Instrucciones De Uso página 6

how to remove the shelf
Release the looking mechanism on each side as
shown by the arrows and pull out the shelf.
1.
shelf support for storage shelf
Place the support hooks in the holes at desired
level, press in as arrow 1 indicates and push down
as arrow 2 indicates.
1.
reInforcement bar
The reinforcement bar no. 1 is a shelf support and
must not be removed for safety reasons.
1
2.
3.
2.
accessorIes
Each kit contains two shelves and shelf supports.
• Sliding shelf
• Storage shelf
Model Max. no. of sliding shelves
A 1 92 G
15
A 1 92 D
storIng the wIne
Bottles should be stored in your wine cellar accord-
ing to their size (diameters and heights.) Take these
differences into account when storing your wine
and avoid mixing the bottles.
The maximum number of "Bordeaux tradition"
bottles that can be stored in a wine cellar that is
fitted with storage shelves and one sliding shelf:
No. of
Model
storage shelves
A 1 92 G
3+2
A 1 92 D
note that you should store no more than one layer
of bottles on the sliding shelves.
The sliding shelves and the storage shelves can be
placed in several positions depending on the size of
your wine cellar.
It is important to store bottles on their side in order
for the cork to remain in contact with the wine.
Place bottles top to bottom in the cellar for
optimum volume use.
See Appendix A for information about the best
way to stack the "Burgundy"/"Bourgogne" and the
"Bordeaux Tradition" bottles.
- 6 -
No. of bottles
192
CaUtiOn