Mount The Bracket - EUFY Video Doorbell 2K Set Guia De Inicio Rapido

3.4 Mount the Bracket

If you're mounting the doorbell on a wooden surface, you don't need to pre-drill
pilot holes. Use the provided screws to secure the Mounting Bracket on the wall.
The Screw Hole Positioning Card indicates the position of the screw holes.
What is required: Power Drill, Mounting Bracket, 15° Mounting Wedge (Optional),
Screw Packs
Mounting Bracket
Phillips-Head Screwdriver
(Attached to 15° Mounting
(User provides it.)
Wedge)
Wall Mounting
Bracket
Without 15° Mounting Wedge
22 English
15° Mounting Screw Packs (Spare screws
Wedge (Optional) and anchors are included.)
Wall Mounting Mounting
Wedge Bracket
With 15° Mounting Wedge
If you're mounting the doorbell on a surface made out of hard materials, like brick,
concrete, stucco:
①
Drill 2 holes through the Screw Hole Positioning Card with 15/64"(6mm) drill
bit.
②
Insert the provided anchors, and then use the provided long screws to secure
the Mounting Bracket on the wall.
What is required: Power Drill, 15/64"(6mm) Drill Bit, Mounting Bracket, 15°
Mounting Wedge (Optional), Screw Packs
Power Drill
15/64"(6 mm) Drill Bit
(not provided)
Mounting Bracket
15° Mounting Screw Packs (Spare screws
(Attached to 15° Mounting
Wedge (Optional) and anchors are included.)
Wedge)
1
English 23