Parts And Features - Big boss POWER JUICER Manual De Instrucciones

PARTS AND FEATURES

9
8
7
6
4
5
1
2
7
1. Main Power Unit-contains powerful motor
2. Power Switch-2 speed selector: 0 (OFF) -1-2
3. Safety Locking Bar-locks the parts in place during assembly
4. Large capacity bowl-temporarily collects juice/pulp prior to dispersing
into juice/pulp cup
5. Pulp Collector-used to collect the pulp
6. Stainless Steel Blade/Filter- filters juice through a mesh strainer
7. Lid with locking tabs-for secure operation
8. Extra Large Feeder-food ingredients are fed through the tube to be
processed; 3 inch feeder allows for whole fruit/vegetable juice extraction
9. Pusher-used for pushing ingredients for higher juice extraction
10. Juice Pitcher (1L/1QT)-used for collecting the extracted juice
10
3
ASSEMBLY
ASSEMBLING YOUR JUICER:
Set the Main Base on a flat, stable surface.
Place Large Capacity bowl onto the Main Base,
so that the spout of the bowl is aligned with
the gap of the Main Base.
1
Place the Lid over the Large Capacity
Bowl, making sure it fits tightly.
3
(Refer to p. 7 for Parts Identification)
Place the Stainless Steel Blade/Filter
inside the Large Capacity Bowl and
press it down firmly. Be careful as
some parts may be sharp.
2
Pull the Safety Locking Bar over the Lid so it fits into the grooves
on the cover. NOTE: This is a safety feature. The Juicer will not
operate unless the Locking Bar is locked in. Do not use the
Locking Bar as a handle for picking up the appliance.
4
8