Tabla de contenido
Publicidad
Indication/Indication/Indicación
NO DISC
ERROR
High-Temp
(Blinking/
Clignotant/
Parpadeante)
134
English/Français/Español
In Case of Difficulty
Indication for MD Head
Unit
Cause and Solution
•
No MD is inserted.
– Insert an MD.
•
Dirty or scratched MD. Bad recording
condition. A non recorded MD. Not a music
MD.
– Press the O/C button and change the
MD.
•
The MD is inserted incorrectly.
– Press the O/C button and insert the MD
correctly.
•
Dew condensation.
– Wait a while.
•
Mechanism error.
1. Press the O/C button and eject the MD.
If not ejecting, consult your Alpine dealer.
2. When the error indication remains after
ejecting, press the O/C button again.
If the error indication still does not turn off
after pressing the O/C button for a few
times, consult your Alpine dealer.
•
Protective circuit is activated due to high
temperature.
– The indicator will disappear when the tem-
perature returns to within operation range.
•
Reset or installation is proceeded with an
MD left in the mechanism.
Malfunction in the mechanism.
– Press the O/C button to open and close
the movable display. (If the MD is in the
mechanism, eject the MD once and
reinsert it.)
Note: When the "ERROR" is displayed:
In case that the disc cannot be ejected by
pressing the O/C (Open/Close) button,
press the Reset button (refer to page 16)
and press the O/C button again.
If not ejecting, consult your Alpine dealer.
English
Publicidad
Tabla de contenido
