Please refer to the "Service Restrictions" shown below to determine if Unit Certification is required for this product.
This certificate reflects the information on the product in the ABS Records as of the date and time the certificate is
printed.
Pursuant to the Rules of the American Bureau of Shipping (ABS), the manufacturer of the below listed product held
a valid Manufacturing Assessment (MA) with expiration date of 20-MAR-2023. The continued validity of the
Manufacturing Assessment is dependent on completion of satisfactory audits as required by the ABS Rules.
And; a Product Design Assessment (PDA) valid until subject to continued compliance with the Rules or standards
used in the evaluation of the product.
The above entitle the product to be called Product Type Approved.
The Product Design Assessment is valid for products intended for use on ABS classed vessels, MODUs or facilities
which are in existence or under contract for construction on the date of the ABS Rules used to evaluate the
Product.
ABS makes no representations regarding Type Approval of the Product for use on vessels, MODUs or facilities
built after the date of the ABS Rules used for this evaluation.
Due to wide variety of specifications used in the products ABS has evaluated for Type Approval, it is part of our
contract that; whether the standard is an ABS Rule or a non-ABS Rule, the Client has full responsibility for
continued compliance with the standard.
Presented to:
STORED ENERGY SYSTEMS, LLC
1840 INDUSTRIAL CIRCLE
CO 80501
United States
Intended Service:
Description:
Tier:
Ratings:
Service Restrictions:
Comments:
03/27/2018 3:00:28 PM
Confirmation of Product Type Approval
Product Name: Battery Charger
Model Name(s): EnerGenius IQ
Charging of stationary batteries while providing clean stable DC power for
continuous loads in Marine and Offshore Applications.
Automatic DC Power Supply / Charger with Intelligent Battery Monitoring & Data
Logging suitable for non-hazardous locations. Model QXXXYYYAZZZZZZZ Where
XXX = DC output voltage Options: 012, 024, 048, 120, 240 Where YYY = DC
output current Options: 006, 012, 016, 025, 035, 050, 075, 100, 150 Where A = AC
input voltage Options: 3 = 208V, 60 Hz 4 = 230-240V, 50/60 Hz 8 = 480V, 60 Hz P
= 115-120/208/230-240V, 50/60 Hz S = 230-240V, 60 Hz T =
115-120/208/230-240V, 60 Hz V = 400V, 50/60 Hz Z = 208/240V, 60 Hz Where Z =
single digit option codes
5
Output Voltage: 12, 24, 48, 120/240 VDC Nominal; Frequency: 50/60 Hz;
Operating Temperature: -40°C to + 50°C; Enclosure: IP 22;
Unit Certification is not required for this product except where used for essential or
emergency services as defined by 4-8-3/5.11.1(a) of the Steel Vessel Rules or
6-1-7/19.9 of the MODU Rules.
- The Manufacturer has provided a declaration about the control of, or the lack of
Asbestos in this product. - The charging facilities are to be such that a completely
discharged battery is recharged to at least 80% capacity in not more than 10 hours.
Copyright 2001 American Bureau of Shipping. All rights reserved.
Certificate Number: 18-HS1725925-PDA
27/MAR/2018
Page 1 of 2