Automatic Cooking - all-clad 2100095568 Guia Del Usuario

AC_OPTIGRILL-AUTOSENSE_ 2100095568.qxp_XXXXXXX 12/04/2016 08:50 Page12
PREHEATING THE APPLIANCE (must be completed before each use, without food between the plates!)
• Press the on/off button. Warning: ensure that there is no food between the plates
• Select the appropriate automatic cooking mode according to the type of food to be cooked (choice of 6
programs).
• Press OK: the appliance will start to preheat and the PREHEAT indicator will blink.
• Wait until it stops blinking, this will take approximately 6-8 minutes.
• You will hear a beep and the PREHEAT indicator will stop blinking to signal that the appliance has finished
preheating.
Note: if you select a program by mistake, press the on/off button again and repeat the same steps.
If the appliance remains close or open for too long once it has finished preheating, the safety system will
turn off the appliance.
ADDING YOUR FOOD
• Once the appliance is preheated, open the grill and add your food between the plates. Close the appliance and
the cooking cycle will start.
• The appliance will automatically adapt the cooking cycle (time and temperature) to the quantity, thickness and
the program selected.
Note: for thinner items: the OK button will blink and the PREHEAT indicator light will remain on. Press OK to
ensure that the grill has recognized the food item and to start cooking.
12 12

AUTOMATIC COOKING