Option B- Telescopic Duct Cover - arietta Dekor Glass 30 Guía De Instalación, Uso Y Mantenimiento

Option B - Telescopic duct cover
The duct bracket should be installed against the back wall and flush with the ceiling. This bracket will hold the
duct cover in place at the top
.
Secure the bracket to the wall:
•
Align the marked centerline on the bracket with the centerline on the wall.
•
Mark 2 screw hole locations in the wall.
•
Drill 5/16" pilot holes in the marked locations.
•
Install wall fastener anchors.
•
Drive wood screws, by hand, into the fastener to allow anchors to expand. Remove the screws.
•
Secure the bracket to the wall with wood screws and/or fasteners.
(this a extra accessory available not included with the hood).
16