Hardware Installation; Hardware Installation For Pci Card; Hardware Installation For Usb Adapater - Atlantis NetFly UP WN Guia De Incio Rapido

4. HARDWARE INSTALLATION

4.1 Hardware Installation for PCI Card

The setup of the Wireless LAN Card can be performed using the following steps:
 Shut down the computer, unplugs its power cord, and remove the chassis
cover.
 Insert the contact edge of the NetFly card into the connector of any available
PCI Bus Master expansion slot. Press the card firmly into the connector such
that the card's contacts are fully seated in the connector.
 Install the bracket screw and secure the card to the computer chassis.
 Visually inspect the PCI Adapter and make sure that it is fully plugged in to
the PCI slot.

Cover the computer's chassis.
 Switch computer power on.
The OS will start an automatic hardware discovery procedure in order to find and
install the best driver available for the device.

4.2 Hardware Installation for USB Adapater

Please plug the Wireless adapter (only when requested from OS) to a free USB slot
on the PC.
Make sure that there is a well environment that there is no
much intrusion to have a better connection.
32