Uc-Mode; Video Out; Memory Location Image Calibration Data; Blind Pixel Correction - Liemke MERLIN–42 Manual De Instrucciones

12. UC-MODE

Depending on the level of humidity, you can use the UC (Ultra
Clear) mode to optimize the image. If the humidity is high, it is
recommended to activate the UC mode.
> In the submenu, activate the menu item as required by pressing
the M button.

13. VIDEO OUT

After activating the video-out function in the submenu, the image
can be transferred to external monitors in PAL format using the
supplied USB cable.
14. MEMORY LOCATION IMAGE
CALIBRATION DATA
At the bottom of the screen the currently selected memory loca-
tion of the image shift data for the attachment mode is displayed.
Up to 4 groups of image calibration data can be saved. (G1, G2,
G3 or G4). In the submenu you can change the memory locations
(indicated by a small triangle).

15. BLIND PIXEL CORRECTION

If a pixel error occurs permanently despite calibration and restart,
it can be corrected as follows:
> In the submenu
> Move the cross to the blind pixel using the Power and C buttons
until the point in the center of the cross covers the blind pixel.
You can change the axis with the M button (up/down respectively
right/left). By pressing longer, the cross can be moved faster in
steps of 10 pixels. A short press moves the cross pixel by pixel.
> Center on the missing pixel, press the Power and C buttons
simultaneously to correct the pixel.
> With a long press of the M button the menu will be closed.
MERLIN-42 · Operating Manual 11 / 2020
/
, select and open the blind pixel correction.
E
N
20
–
21