Sengled element classic Manual De Usuario página 3

then back on) quickly for at minimum ten times. The bulb will
blink five times indicating pairing mode.
EZ-Mode commissioning from the bulb: Power cycle the bulb
(off then back on) seven times quickly to enable EZ-Mode.
The bulb will blink to indicate that it is in this mode for three
minutes. To exit this mode earlier, power off the bulb via the
wall switch, wait for two seconds and then power it back on.
System Setup Instructions
• Download and install the free Element app on the mobile
device.
• Create an account with Sengled cloud service from the app
and then login.
• Power on the hub and connect it to a Wi-Fi router via the
supplied Ethernet cable.
• Follow the in-app instructions to add hub and bulbs to the
account.
• Once the hub is added to the account, the hub can be kept
in wired mode, or the Ethernet cable between the hub and the
router can be removed. In the wireless mode, hub can be
moved to anywhere inside the home or office so long as it
receives strong enough Wi-Fi signal from the router.
• NOTE: Bulbs associated with another Sengled account
must first be deleted and factory reset. Refer to the Local
Operations section of the User Manual for instructions on
how to factory reset a bulb.
• NOTE: Bulbs accidentally deleted from a Sengled account
must first be factory reset before being re-added.
Add Bulbs
Device detail
Add Bulb
Scan code Mac address
(1) (2)